Choose a Category
-
>
Gears, Differentials, Racks & Pinions
- Spur Gears
- Bevel Gears
- Miter Gears
- Racks
- Helical Gears
- Internal Gears
- Worm Gear Pairs
- Screw Gears
- Differentials
- Gear and Dial Hubs
- Gear Blanks
- Gear Clamps, Precision & Commercial
- Pinion Shafts
- Pinion Wire
- Spur Gear Stock
- Splines
- Cluster Gears
- Designing with Plastic Gears
- Helical Gears Technical Information
- Internal Gear Technical Information
- Planetary Gear Design
- Spur Gears Technical Information
- > Synchronous Drive Belts, Pulleys, & Cables
- > Couplings, Flexible Shafts, & Universal Joints
- > Chains & Sprockets
-
>
Shafts & Shaft Accessories
- Shafts & Drill Rods
- Sleeves, Hexagonal Hole
- Sleeves, Plain, Square Hole
- Sleeves, Partially Threaded, Square Hole
- Bushings, Square Hole, with Slit
- Stocks
- Shaftloc® - Sleeves, Pulleys & Accessories
- Bushings, Locking Hub
- Collars, Shaft
- Reducers & Extenders, Shaft
- Supports, Shaft
- Bore Reducers
- Ball Splines, Telescoping
- Shaft Lock, Nut Type Potentiometers
- Shaft Bushings, Taper
-
>
Bearings & Linear Motion Components
- Ball Bearings
- Linear Bearings
- Press-Fit Bearings
- Needle Roller Bearings
- Sintered Bronze Bars
- Sleeve Bearings
- Spherical Bearings
- Thrust Bearings & Washers
- Bearing Blocks
- Rod Ends
- Bearing Spacers
- Hydro-Dynamic Pressure Bearings
- Bearing Housings
- Frelon® Lined Flanged Aluminum Sleeve Blocks
- Ball Bearing Technical Information
- Ball Bearing Lubrication and Surface Finishes
- Plastic and Non-Metallic Bearings
- Porous Metallic Bearings
- > Motors, Gearheads, & Motion Control
- > Speed Reducers & Right Angle Drives
- > Hardware
- > Miscellaneous Components
- > Linear Guide Systems
- > Clutches & Brakes
- > Vibration & Shock Mounts
Plain Square Hole Sleeves


PLAIN
MATERIAL:
C.R.S. 1117 (May be Case-Hardened)
CONCENTRICITY:
.003 T.I.R. Between O.D & Square Hole
SPECIFICATION:
Square Hole Sleeves are available in two styles:
SPECIFICATION:
Square Hole Sleeves are available in two styles:
1. One with a tapped hole at one end to receive a back-up screw which we supply.
2. One with a squared hole end to end without thread or back-up screw.
Sleeves also may be ordered with .015 grinding stock on O.D.,
if desired. Add “G” to catalog number. Tolerance is the same as on standard O.D.
Scroll to view full table >>>
Product Name | Catalog PDF | Hole Size | Length | Material | Outside Diameter | Tool Bit Sizes | Stock | Price | Qty | Add to Cart | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Filter Products
- Hole Size
- Length
- Outside Diameter
- Tool Bit Sizes