Choose a Category
-
>
Gears, Differentials, Racks & Pinions
- Spur Gears
- Bevel Gears
- Miter Gears
- Racks
- Helical Gears
- Internal Gears
- Worm Gear Pairs
- Screw Gears
- Differentials
- Gear and Dial Hubs
- Gear Blanks
- Gear Clamps, Precision & Commercial
- Pinion Shafts
- Pinion Wire
- Spur Gear Stock
- Splines
- Cluster Gears
- Designing with Plastic Gears
- Helical Gears Technical Information
- Internal Gear Technical Information
- Planetary Gear Design
- Spur Gears Technical Information
- > Synchronous Drive Belts, Pulleys, & Cables
- > Couplings, Flexible Shafts, & Universal Joints
- > Chains & Sprockets
-
>
Shafts & Shaft Accessories
- Shafts & Drill Rods
- Sleeves, Hexagonal Hole
- Sleeves, Plain, Square Hole
- Sleeves, Partially Threaded, Square Hole
- Bushings, Square Hole, with Slit
- Stocks
- Shaftloc® - Sleeves, Pulleys & Accessories
- Bushings, Locking Hub
- Collars, Shaft
- Reducers & Extenders, Shaft
- Supports, Shaft
- Bore Reducers
- Ball Splines, Telescoping
- Shaft Lock, Nut Type Potentiometers
- Shaft Bushings, Taper
-
>
Bearings & Linear Motion Components
- Ball Bearings
- Linear Bearings
- Press-Fit Bearings
- Needle Roller Bearings
- Sintered Bronze Bars
- Sleeve Bearings
- Spherical Bearings
- Thrust Bearings & Washers
- Bearing Blocks
- Rod Ends
- Bearing Spacers
- Hydro-Dynamic Pressure Bearings
- Bearing Housings
- Frelon® Lined Flanged Aluminum Sleeve Blocks
- Ball Bearing Technical Information
- Ball Bearing Lubrication and Surface Finishes
- Plastic and Non-Metallic Bearings
- Porous Metallic Bearings
- > Motors, Gearheads, & Motion Control
- > Speed Reducers & Right Angle Drives
- > Hardware
- > Miscellaneous Components
- > Linear Guide Systems
- > Clutches & Brakes
- > Vibration & Shock Mounts
Spring-Wrapped Slip Couplings
COVERED BY U.S. PATENTS AND PATENTS PENDING
FEATURES:
- Long life under continuous slip conditions
- Unidirectional or bidirectional operation
- Same or different clockwise and counterclockwise torques
- Precise and stable limit torque calibration (0.0035 to 1.695 N • m)
- Same torque at breakaway as at high slip velocities
- Corrosion-resistant materials
APPLICATIONS:
- Tension control of film or tape drives
- Friction loads for testing components
- Transmission overload protection
RECOMMENDED MOUNTING PROCEDURE:
Coupling is slipped over one shaft and applicable screws tightened.
Second shaft is inserted into other end of coupling.
Pull loose end of coupling back about 0.5 mm and tighten applicable screws
Scroll to view full table >>>
Product Name | Catalog PDF | Bore Depth (l) | Bore Sizes (d₁ / d₂) | Hub (Dia. / Projection) | Material | Outside Dia. (D) | Overall Length (L) | Upper Limit Torque (N•m) | Weigth (grams) | Stock | Price | Qty | Add to Cart | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Filter Products
- Bore Depth (l)
- Bore Sizes (d₁ / d₂)
- Hub (Dia. / Projection)
- Outside Dia. (D)
- Overall Length (L)
- Upper Limit Torque (N•m)
- Weigth (grams)